Spring Changing In A Garage Door
Changing the springs in your garage door can be a hassle, but the companies that provide this service can be expensive too. There are 2 types of garage door springs: torsion springs and extension springs. Keep reading this article to find out how you can change your own garage door torsion springs for Spring Replacement Santa Ana.
First of all, where is the torsion spring? If you stand in front of your garage door on the inside of your garage you will see a metal bar on the top that goes from one side to the other, in the center of that bar is your spring measuring about 1-meter-long and 10 cm wide. This bar is called the torsion bar, that is why the spring is called a torsion spring for Spring Replacement Santa Ana.
Garage doors are very essential for the construction of buildings, especially buildings which makes the provision for vehicles to be kept in it. They don’t just beautify the entire edifice but also secures the vehicles which are going to be kept in that garage. A garage door, as large and accommodating as it should be, should also have certain features to ensure the maximum security of the prospective user.
Garage doors can be traced way back into BC 400’s. Where edifices known as gatehouse was the place where chariots were kept. These gatehouses according historians had very secured and outstanding doors, which were large enough to accommodate any chariot size that was to be stored in it.
First of all what is a garage door in the first place? A garage door is a large gate or door which is placed at the openings of garages, and they are either configured to open automatically or manually. The automatic ones are built with an electric motor in it that enable it to automatically swing or slide or tilt towards the ceiling of the garage.